Product Introduction
Based on CFS Solar's leading multi-busbar technology, modules incorporate 182mm silicon wafers, non-destructive cutting and high-density interconnect technologies.By using half-cells module technology, the electrical current flowing in each busbar is halved.Therefore, the amount of internal losses in a half-cut module is 1/4 of a full sized cell module.Shading loss of half-cell is much better than normal module in certain shading conditions.
Features
MBB Half Cut Cell bifacial Technology.
Higher Module Conversion Efficiency.
Low-light Performance
Light weight design.
Higher Power Output.
Application
Solar modules can be used in a variety of scenarios, at home or for projects, in construction or agriculture. A wide range of module designs to suit various application scenarios, satisfying the diverse needs of our customers.
Parameters
| ELECTRICAL PERFORMANCE | ||||||
| Maximum Power |
525W |
530W |
535W |
540W |
545W |
550W |
| Open circuit Voltage(Voc) |
49.05V |
49.20V |
49.35V |
49.50V |
49.65V |
49.80V |
| Short circuit Current(lsc) |
13.65A |
13.71A |
13.78A |
13.85A |
13.92A |
13.98A |
| Maximum Power Voltage(Vm) |
41.20V |
41.35V |
41.50V |
41.65V |
41.80V |
41.95V |
| Maximum Power Current(lm) |
12.75A |
12.82A |
12.90A |
12.97A |
13.04A |
13.12A |
| Module efficiency |
20.3% |
20.5% |
20.7% |
20.9% |
21.1% |
21.3% |
| Maximum Series Fuse | 25A | |||||
| Watts positive tolerance | 0~+3% | |||||
| Number of Diode | 3 | |||||
| Standard Test Conditions | 1000W/M2,25°C ,AM1.5 | |||||
| Maximum System Voltage | 1500VIDC | |||||
| Normal Operating Cell Temperature | 45±2℃ | |||||
| Load Capacity for the cover of the module(glass) | 5400Pa(lEC61215)(snow) | |||||
| Load Capacity for the front &back of the module | 2400Pa(lEC61215)(wind) | |||||
| MECHANICAL CHARACTERISTICS | |
| Front cover(material/thickness) | low-iron tempered glass/3.2mm |
| Cell (quantity/material/dimensions) | 144(6x24)/monocrystalline silicon |
| Junction box(protection degree) | ≥lP68 |
| Cables &Plug connectors | 4mm2,300mm in length,length can be customized |
| Module Dimensions(L/W/H) | 2279x1134x35mm |
| Module Weight | 27.2kg |
| Application class | Class A |
Production Processes
Perfect quality inspection. Continuous online monitoring and photographic recording of the production of each battery and component. Perfect quality control information management system. Ensure the complete preservation of each data. Intelligent alarm and shutdown mechanism to ensure zero deviation and zero error. Strict acceptance standards and strict tolerance requirements.
