Leave Your Message

US 5KW 6KW Solar Off-Grid Inverter
Solar Inverter

US 5KW 6KW Solar Off-Grid Inverter

120V/240V Split Phase Low Voltage Inverter

Split Phase output (120V/240V), suitable for Mexico, Costa Rica, Ecuador, Panama, and Venezuela markets,pure sine wave output. Built-in 2 strings of MPPT solar charge controller, configurable AC / Solar input priority via LCD setting, 50Hz & 60Hz support, programmable parameters. Max up to 60A utility charging, adjustable bulk & float charging voltage, support either grid or generator input. Genset starter dry contact, auto restart while AC is recovering, Ideal for Off-Grid or Grid-backup application, overload and short circuit protection, LCD Display + LED indicators, Cold start function, RS232/USB communication interface. Stackable — parallel up to 3 units for single phase, split phase and three phase applications.

  • Model 5000W/6000W
  • Maximum Parallel Up to 3 Units
  • Output Waveform Pure Sine Wave
  • Communication Port USB/RS232/Dry Contact
  • Net Weight 30KG
  • Dimension 623*610*130mm

PRODUCT INTRODUCTION


Off grid solar 240 volt split phase 5000 watt and 6000 watt inverter 48v is the alternating current (AC) equivalent of the original Edison Machine Works three-wire direct-current system. Split phase system is defined as having 2 x 120V hot wires (normally denoted as L1 and L2 and each hot wire is 120V in relation to the neutral wire), 1 neutral wire, and a ground wire. By using the two opposite phase hot wires together 240V is created between L1 and L2. Two 120 V AC lines are supplied to the premises which are out of phase by 180 degrees with each other (when both measured with respect to the neutral), along with a common neutral. The neutral conductor is connected to ground at the transformer center tap. 240 volt split phase 15000 watt inverter 48v is stackable by two units 5000 watt inverter, it can simultaneously manage inputs from both solar panels and a battery bank, charging batteries with either solar panels or the electricity grid. When the inverter is used in parallel for single phase application, it need to select “2A0” in program 28. L1 to L2 output voltage is 0V and L to N output voltage is 120Vac. Support L1 – L2 phase output on split phase application with L1 to L2 output voltage in 240V.

FEATURES


1.Versatile AC output modes: single phase 120v, split phase 240v, and 3-phase 208v 
2.Pure sine wave output 5KW/48VDC 
3.Dual MPPT Input up to 160A max charge 
4.Max PV input power up to 8KW(4KW*2) 
5.Utility charging up to 60A Max 
6.Max total system charging uo to 220A 
7.Parallel operation up to 3 units max 
8.Genset starter dry contact 
9.Programmable parameters 
10.Ideal for Off-Grid or Grid-backup application 
11.Easy to install 
12.Free monitoring software 
13.LCD Display+LCD indicators 
14.USB,RS232 communication interface.

PRODUCT SPECIFICATIONS


Model
CFS LV 5032US
CFS LV 6032US
Continuous Output
5000W
6000W
System DC Volt
48VDC
AC Input Voltage
110/120VAC(Phase-Neutral)
Maximum Parallel
Up to 3 Units
PV INPUT/SOLAR CHARGING
Max PV Input Power
8000W(4000W each input)
Max PV Input Volt
145V(open circuit Voc)
MPPT Range
60-110VDC
Number of PV Input
2
Max Charging Current
160A(80A×2)
OUTPUT MODE
Output Waveform
Pure Sine Wave
AC Output mode
120V L-N/240V L1-L2/208V L1-L2 3-Phase
Frequency
50/60Hz,anto-sensing
Max Bypass Current
40A
Max Efficiency
>90%
Max Utility Charging
60A
Max Utility+Solar Charging
220A
Max Bulk/Float Charge
58.4V
ENVIRONMENTAL/MECHANICAL SPECIFICATIONS
Communication Port
USB/RS232/Dry Contact
Operating Temp.
0~50℃
Dimension,D×W×H(mm)
623*610*130mm
Net Weight
30KG