Leave Your Message

4KW 6KW Solar Off-Grid Inverter With Dual Outputs
Solar Inverter

4KW 6KW Solar Off-Grid Inverter With Dual Outputs

Larger Power With WiFi

CiFi SUN  is releasing a new solar inverter  "TWIN" models. All TWIN models are enlarged inverter power rating, and equipped with three new features: dual outputs, PV input current increase to 27A, and wider input voltage range. PV inpuit voltage range 60-500V,built in MPPT120A, detachable LCD screen, built in Wi-Fi Monitor kit, two output for smart load management, communication port for BMS.

  • Model TWIN 4K/6K
  • Rated Power 4000VA/4000W, 6000VA/6000W
  • Waveform Pure sine wave
  • Net Weight 9/10KG
  • Communication Interface USB/RS485/WIFI/Dry-contact)
  • Dimension(mm) 115x300x435(packing:220*390*490cm)

PRODUCT INTRODUCTION


Dual Outputs for Smart Load Management – Advanced Control & Flexibility Management.

TWIN series is offering a second AC output for smart load management. Users can set cut-off voltage or state of charge (SoC) percentage, discharge time and scheduled time for 2nd AC output on/off through LCD operation. It helps to extend backup time on critical loads by shutting down the second output or schedule on second output during sufficient power source and off at night. It increases flexibility of load control.
Maximum PV Input Current to 27A – Support Solar Panels in Higher Wattages.
In response to emerging solar industry trends of adopting solar panels in higher wattages, Axpert Off-grid inverter TWIN series supports maximum PV Input Current to 27A to coordinate with your high efficient PV system.
Wide PV Input Voltage Range 60VDC ~ 450VDC – Maximize Efficiency & Minimize Cost.
TWIN series supports minimum PV input voltage starting from as low as 60 VDC which extends the effective working period of PV panels to harvest more solar energy. It also requires fewer PV panels to build up a PV system (starting from 2 PV panels) that is flexible to meet installers' needs and save precious space.

FEATURES


1.Dual outputs for smart load management 
2.Maximum PV input current 27A 
3.Wide PV input voltage range60VDC~450VDC 
4.Detachable LCD control module with various communications 
5.Integrated WiFi interface with Mobile App 
6.Supports USB On-the-Go function 
7.Reserved communication port(RS-485,CAN-BUS or RS-232) for BMS 
8.Battery equalization extends lifecycle 
9.Battery independency 
10.User-friendly LCD operation 
11.Replaceable fan design

PRODUCT SPECIFICATIONS


Model
TWIN 4K
TWIN 6K
Rated Power
4000VA/4000W
6000VA/6000W
INPUT
Voltage
230VAC
select Voltage range
170-280VAC(For Personal Computers),90-280VAC(For Home Appliances)
Frequency
50HZ/60HZ(Auto sensing)
OUTPUT
AC Voltae Regulation(Batt Mode)
230VAC±10%
Surge Power
8000VA
12000VA
Efficiency(Paek)
90%-93%
90%-93%
Transfer Time
10ms(For Personal Computers),20ms(For Home Appliances)
Waveform
Pure sine wave
BATTERY
Battery Voltage
24VDC
48VDC
Floating Charging Voltage
27VDC
54VDC
Overcharging Protection
33VDC
63VDC
SOLAR CHARGER AND AC CHARGER
Solar Charger Type
MPPT
MPPT
Maximum PV Array Power
5000W
6000W
MPPT Range@operating Voltage
60-450VDC
Max, PV Array Open Circuit Voltage
500VDC
Max. Solar Charge Current
120A
120A
Max. AC Charge Current
100A
100A
Max,. Charge Current
120A
120A
PHYSICAL
Dimension DXWXH(mm)
115x300x435(packing:220*390*490cm)
Net Weight(kgs)
9kg
10kg
Communication Interface
USB/RS485/WIFI/Dry-contact)
OPERATING ENVIRONMENT
Humidity
5% to 95% Relative Humidity(Non-condensing)
Operating Temperature
-10℃—50℃
Storage Temperature
-15℃—60℃